400 series, Vario gas cooktop, 15", Natural gas 15 mbar

Three-ring burner with up to 18,800 BTU Full electronic power level regulation on 12 levels Full electronic gas valves for precise and reproducible power regulation Automatic quick ignition, electronic flame monitoring with automatic re-ignition Simmer function for cooking on a very low output level Solid stainless steel control knobs Precision crafted 3mm stainless steel frame For surface-mount installation with a visible edge or for flush installation Can be perfectly combined with other Vario 400 series appliances Cooking zones 1 three-ring wok burner (300 W - 5,500 W) 1,000 – 18,800 BTU, suitable for pots up to max. 12 5/8" Operation Control knobs with illuminated ring, cooking zone and output level markings. One-handed operation. Full electronic control in 12 output levels for exact power level regulation plus simmer function. Automatic quick ignition. Features Simmer function. Cast-iron pan support with flat, continuous pot surface. Brass burner rings. Safety Electronic flame monitoring with automatic re-ignition. Residual heat indicator. Safety shut-off. Planning notes Depending on the type of installation — surface-/ or flush-mounted, with or without cover — the specific location of the control knob positions may vary. The adjacent drawing "Installation of the control knob" must be observed if the panel is more than 1" thick. There must be a recess at the rear for proper electronic knob installation. If combining several Vario appliances of the 400 series, a connection strip VA 420 must be placed between the appliances. Depending on the type of installation, the corresponding connection strip must be provided. The bearing capacity and stability, in the case of thin countertops in particular, must be supported using suitable substructures. Take into account the appliance weight and additional loads. Additional instructions for flush mounting: Flush installation is possible in countertops made of stone, synthetics or s