400 series, Vario electric grill, 15"

Two zones can be operated together or separately Half size cast-iron griddle included for simultaneous searign and grilling on two seperate surfaces Open cast-iron grill, lava stones Solid stainless steel control knobs Precision crafted 3mm stainless steel frame For surface-mount installation with a visible edge or for flush installation Can be perfectly combined with other Vario 400 series appliances Operation Control knobs with illuminated ring, cooking zone and output level markings. Electronic control in 12 output levels. Features Cooktop, lava stone trough and grease collecting insert from stainless steel. Two zones, each 1500 W, can be operated together as a complete surface or each half separately. Two-part cast grill. Safety Safety shut-off. Pre-heat and residual heat indicator. Planning notes Depending on the type of installation — surface-/ or flush-mounted, with or without cover — the specific location of the control knob positions may vary. If installing with the appliance cover VA 440 take into account the additional space required for the depth. If combining several Vario appliances of the 400 series, a connection strip VA 420 must be placed between the appliances. Depending on the type of installation, the corresponding connection strip must be provided. The bearing capacity and stability, in the case of thin countertops in particular, must be supported using suitable substructures. Take into account the appliance weight and additional loads. Additional instructions for flush mounting: Flush installation is possible in countertops made of stone, synthetics or solid wood. Heat resistance and watertight sealing of the edges must be observed. For other materials, please consult with your countertop manufacturer. The groove must be continuous and even, so that uniform placing of the appliance on the gasket is ensured. Do not use discontinuous lining. The joint width may vary due to size tolerances of the combinations and